RigCrafty Runs in your browser · Nothing to install

Mouse Test

Click every button, scroll the wheel and press the side keys inside the box. Each part of the mouse lights up as soon as it works, and suspicious double clicks are flagged in red.

Left clicks
0
Double clicks
0
Fastest left gap
—

Click, scroll and press the side buttons here

This test needs a mouse or touchpad.

InputPressesDouble clicks
Left button00
Right button00
Middle button00
Back (side)00
Forward (side)00
Scroll up0—
Scroll down0—
Tilt left0—
Tilt right0—
Wheel jumps—0

Event log

    How to test your mouse

    1. Move the pointer into the test area. Inside it, right clicks, middle clicks and side buttons are captured, so nothing else happens on the page.
    2. Press each button a few times: left, right, the scroll wheel, and both thumb buttons. Each one turns green on the drawing and in the table when it registers.
    3. Scroll up and down, and tilt the wheel left and right if your mouse supports it. Watch the “wheel jumps” counter while you scroll steadily in one direction.
    4. Finally, click the left button normally at least 30 times. If any press is followed by a second one within a few dozen milliseconds, the test flags it as a double click.

    Common mouse problems this test finds

    Unwanted double clicks. The most common failure. The metal contact inside the switch wears out and “bounces”, so one press is sent as two. Files open when you meant to select them and drag-and-drop lets go by itself.

    Dead or intermittent buttons. A button that only works when pressed hard, or not at all, usually has a worn switch or a loose connection.

    Jumpy scroll wheel. Dust in the wheel encoder makes the page jump back while you scroll. Short bursts of compressed air often fix it.

    Remapped buttons. If a button sends something unexpected, the cause is often your mouse software or a game profile rather than the hardware.

    What to do if a button fails

    First, try another USB port and another computer to rule out software. If the double click problem follows the mouse, the switch is worn. Many mice are still under warranty — a screenshot of this test is a clear way to show the fault. For a closer look at clicking problems, use the double click test.

    Frequently asked questions

    Why do my side buttons not show up?

    Most browsers see the two thumb buttons as “back” and “forward”. If they do not light up, the mouse software may have remapped them to a key or macro, or the button may be faulty. Reset the mapping in your mouse software and try again.

    Will the side buttons send me to the previous page?

    No. While this test is open, back and forward clicks are captured by the page, so you can press them as often as you like without leaving.

    My middle button does not work — is it broken?

    Press straight down on the scroll wheel until you feel a click. If nothing lights up, check whether your mouse software assigns the middle click to another action. If it is set to the default and still does not register, the switch under the wheel is likely worn.

    What does “wheel jumps” mean?

    It counts moments when the wheel reported the opposite direction just milliseconds after you were scrolling the other way. A few of these when you change direction are normal; frequent jumps while scrolling one way point to a dirty or worn wheel encoder.

    Does this test work with a touchpad?

    Yes. Tapping or clicking a touchpad registers as left and right clicks, and two-finger scrolling registers as the wheel. Side buttons only exist on mice.

    Related

    More free tests